Multiflow 6 pot system

Multiflow 6 pot system
Is a range of pot based, Flood and Drain systems. This is the system that started the current boom in active pot systems, often copied but never equaled in terms of quality and reliability.

The system does not include pot stands and propagation domes.

Powered by a controller, the Multiflow floods and drains each of the growing pots, ensuring that your plants receive fresh nutrient and plenty of oxygen / to enhance growth rates.

Multiflow System Installation

     First you lay out the pots and set them on a level surface.
     Then connect the pots, Brain pot and reservoir tank together using the various fittings and tubing included.
     Once you have done this, plug the power cord of the pump in the reservoir into the controller unit and set your watering times. Installation is now complete.

The operation of the multiflow system is very simple

     When the timer reaches the watering time you have selected, the pump turns on inside the reservoir pumping nutrient solution into the controller unit.
     The controller is connected to the pots via a supply tube, linking all the pots together at the base.
     As the controller starts to fill, nutrient will flow from the controller, down the supply tube and into each pot.
     Once the desired fill level in the controller is reached, a float switch cuts the power to the pump in the reservoir. All the pots will now be flooded with nutrient.
     The float switch maintains the fill level in the controller tank until the timer on the controller switches off.
     Once the timer turns off, the pump inside the controller is engaged and the nutrient is then pumped back into the reservoir. This will continue until the nutrient level reaches the preset drain depth, and then the pump will turn off.
     At this point all the nutrient has drained from each pot, and the plant roots will have been replenished with fresh nutrient and oxygen.

Kit Contents.
    Controller unit with timer and relay
     100 litre reservoir
     2 x submersible pumps
     ½”elbows and tees
     ½” supply tubing